The Protimeter Aquant Non-Invasive Moisture Meter is used to assess and monitor the relative moisture level of building materials including plaster, drywall, masonry, concrete and fiberglass (GRP).

It is ideal for checking the relative moisture condition of building elements such as solid walls and floors prior to more rigorous and time-consuming investigative procedures that may be required.

The Aquant can be used to detect the presence of moisture behind floor and wall coverings such as ceramic tile and vinyl floor coverings. It can also be used for surveying GRP boat hulls for the early detection of damp spots that could lead to blistering caused by osmosis.

Features:

• Detects moisture directly in materials and below wall and floor coverings such as tile,
  wood and vinyl.
• Reset reading for sensitivity adjustment
• Not adversely affected by surface moisture such as condensation.
• Dual Display LCD and LED.
• Color changing LED's to show moisture condition.

The Aquant has a digital display that is synchronized with a color-coded LED scale. The display shows the relative moisture level of the material under investigation on a scale of 0-999 and the color coded LED scale indicates the material's moisture condition.

To use, the Aquant is simply held against the surface of the material under investigation. The relative moisture level is measured by radio frequency to a nominal depth of 10-20mm. There are no needles to mark the surface and the Aquant is not adversely affected by moisture.

Technical Specification:

• Range 0 - 999 Relative
• Display 1- Digital LCD
• Display 2- 60 LED's
• Hold Reading Feature
• Depth of measurement Up to 3/4"
• Case & Pouch with belt loop.
• Power - 9v (supplied)

Your shipment will include:

• 1no. Protimeter Aquant
• 1no. Battery
• 1no. Protective Pouch
• 1no. Instruction Pack
• 1no: 24 Month Warranty